One power steering pump supply pipe intermediate rigid joint r r
- Make
- Alfa Romeo
- Model
- 159 Factory Service Manual
- Year
- 2005–2011
- Section
- Power steering › One power steering pump supply pipe intermediate rigid joint r r
ONE POWER STEERING PUMP SUPPLY PIPE INTERMEDIATE RIGID JOINT R R
Removing
- Position the vehicle on a lift.
Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.
Op. 1048A50 TURBOCHARGER AIR INTAKE PIPE - R.R.
- Draw off the power assisted steering fluid from the reservoir using a suitable syringe.
1. Loosen the collars (1a), unscrew bolt (1b) and remove the intermediate rigid joint of the power steering pump supply pipe (1c).
Refitting
- Refit the intermediate rigid joint of the power steering pump supply pipe in its seat, tighten the bolt and the collar.
Op. 1048A50 TURBOCHARGER AIR INTAKE PIPE - R.R.
Op. 0010T71 POWER STEERING FLUID CHECK LEVEL AND TOP UP IF NECESSARY
Op. 0010T75 HYDRAULIC POWER STEERING SYSTEM BLEED AIR
Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.
- Remove the vehicle from the lift.
Parts & tools for this job For 2005 Alfa Romeo 159
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Alfa Romeo power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.