Workshop Manuals Factory service & repair Alfa Romeo
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Transmission (4x4)12 Axles and driveshafts13 Brakes14 Steering15 Suspension and wheels16 Heating, air conditioning and auxiliary units17 Electrical equipment18 Body fittings19 Body panels and frame20 Wiring diagrams and electrical functions21 Wiring harnesses22 Connectors and pin-outs23 Fault diagnosis24 Special tools
Alfa Romeo Brera and Spider Factory Service Manual (2005-2010)17 · Electrical equipment
17 · Electrical

Check operation of voice recognition

Make
Alfa Romeo
Model
Brera and Spider Factory Service Manual
Year
2005–2010
Section
Accessories › Check operation of voice recognition
Electrical equipmentCheck operation of voice recognition

CHECK OPERATION OF VOICE RECOGNITION

Check 5570TO

CHECK TO BE PERFORMEDRESOLUTION IF THE CHECK IS NOT OK
1

Press the START/STOP button (panel off).

Press the voice recognition button among the steering wheel controls (lower left in the left unit) and check whether a tone can be heard indicating activation of the function

Continue as instructed in the

See table N069 THE BLUETOOTH CONTROLS ON THE STEERING WHEEL DO NOT WORK

CHECK OPERATION OF VOICE RECOGNITION
CHECK TO BE PERFORMEDRESOLUTION IF THE CHECK IS NOT OK
2Speak the word "Help" in the langauge installed on the Bluetooth® system and check that the systems responds with a voice message

Continue as instructed in the

See Test 5570TN BLUETOOTH LANGUAGE UPDATE PROCEDURE

then move on to Step 7

3Press the voice recognition button to interrupt the message and say the word "Settings" in the langauge set on the Bluetooth® system and check that the system responds with a voice message

Continue as instructed in the

See Test 5570TN BLUETOOTH LANGUAGE UPDATE PROCEDURE

then move on to Step 7

4Press the voice recognition button to interrupt the message and say the word "Cancel" in the langauge set on the Bluetooth® system and check that the system deactivates the voice recognition

Continue as instructed in the

See Test 5570TN BLUETOOTH LANGUAGE UPDATE PROCEDURE

then move on to Step 7

5While the customer''s phone is connected to Convergence, press the voice recognition button and say the keyword "Telephone" in the langauge set on the Bluetooth® system and check that the system responds with a voice message

Continue as instructed in the

See Test 5570TN BLUETOOTH LANGUAGE UPDATE PROCEDURE

then move on to Step 7

6

Check how to operate the mobile phone voice recognition correctly by reading the phone user handbook. The system should work on the vehicle too if the settings are correct.

The test can be considered over

The problem is inherent to the phone: the customer must contact a mobile phone service centre
7Carry out Bluetooth Network Disconnection active diagnosis, then repeat the entre test and ensure it is successful

Replace the Bluetooth® control unit

Op. 5570T49 BLUETOOTH ELECTRONIC CONTROL UNIT - R.R.

Parts & tools for this job For 2005 Alfa Romeo Brera

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.