Timing angles
- Make
- Alfa Romeo
- Model
- Brera and Spider Factory Service Manual
- Year
- 2005–2010
- Section
- Engine › Timing angles
SpecificationsTiming angles
TIMING ANGLES
| 2.2 JTS | 3.2 JTS | 2.4 JTD 20v | ||
|---|---|---|---|---|
| Valve clearance for operation when cold (mm) | Inlet | (•) | (•) | (•) |
| Exhaust | (•) | (•) | (•) | |
| Inlet | Opens BTDC | 3° (*) | 10° | |
| Opens after TDC | 11.5° (*) | |||
| Closes after BDC | 75° (*) | 85.5° (*) | 18.5° | |
| Exhaust | Opens BBDC | 70° (*) | 61° (*) | 40° |
| Closes after TDC | 4° (*) | 9° (*) | 9° | |
(*) Hydraulic tappets
(*) The angles refer to the basic fitting condition of the camshafts, without the intervention of the phase transformers
Parts & tools for this job For 2005 Alfa Romeo Brera
- PARTEngine gasket setSearch: Alfa Romeo Brera 2005 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.