1. Disconnect the rapid connector for the return pipe from the heat exchanger pipe to the power assisted steering fluid reservoir, heat exchanger pipe side.

1. Disconnect the rapid connector for the intermediate return pipe from the power steering box to the heat exchanger, heat exchanger side.

Collect the power assisted steering fluid that comes out in a suitable container.

1. Remove the heat exchanger pipe (1a) after having released it from the fastenings (1b).

Refitting

- Place the heat exchanger pipe in its housing and secure it using the bands.

- Connect the rapid connector for the intermediate return pipe from the power steering box to the heat exchanger, heat exchanger side.

- Connect the rapid connector for the return pipe from the heat exchanger pipe to the power assisted steering fluid reservoir, heat exchanger pipe side.

Op. 7210A15 R.R. FRONT WING/HEADLAMP HOUSING CROSSMEMBER

Op. 7210E10 R.R. FRONT BUMPER

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

Op. 1048A14 AIR CLEANER FILTER ELEMENT - REPLACE.

Op. 1048A28 VACUUM AIR CIRCUIT RESONATOR PIPE - R+R

Op. 1048A34 SLEEVE(S) FROM FLOW METER TO AIR SUPPLY CAPACITY CASE - R + R

Op. 0010T71 POWER STEERING FLUID CHECK LEVEL AND TOP UP IF NECESSARY

Op. 0010T75 HYDRAULIC POWER STEERING SYSTEM BLEED AIR

- Remove the vehicle from the lift.

‹ Prev Return pipe from heat exchanger to power assisted steering fluid reservoir - r.r.Next › Return pipe from heat exchanger pipe to power steering fluid resevior r r