One power steering pump supply pipe intermediate rigid joint r r
- Make
- Alfa Romeo
- Model
- Brera and Spider Factory Service Manual
- Year
- 2005–2010
- Section
- Power steering › One power steering pump supply pipe intermediate rigid joint r r
ONE POWER STEERING PUMP SUPPLY PIPE INTERMEDIATE RIGID JOINT R R
Removing
- Position the vehicle on a lift.
Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.
Op. 1048A50
- Draw off the power assisted steering fluid from the reservoir using a suitable syringe.
1. Loosen the collars (1a), unscrew bolt (1b) and remove the intermediate rigid joint of the power steering pump supply pipe (1c).
Refitting
- Refit the intermediate rigid joint of the power steering pump supply pipe in its seat, tighten the bolt and the collar.
Op. 1048A50
Op. 0010T71 POWER STEERING FLUID CHECK LEVEL AND TOP UP IF NECESSARY
Op. 0010T75 HYDRAULIC POWER STEERING SYSTEM BLEED AIR
Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.
- Remove the vehicle from the lift.
Parts & tools for this job For 2005 Alfa Romeo Brera
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Alfa Romeo power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.