Workshop Manuals Factory service & repair Alfa Romeo
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Transmission (4x4)12 Axles and driveshafts13 Brakes14 Steering15 Suspension and wheels16 Heating, air conditioning and auxiliary units17 Electrical equipment18 Body fittings19 Body panels and frame20 Wiring diagrams and electrical functions21 Wiring harnesses22 Connectors and pin-outs23 Fault diagnosis24 Special tools
Alfa Romeo Brera and Spider Factory Service Manual (2005-2010)20 · Wiring diagrams and electrical functions
20 · Electrical

Reversing lights - description

Make
Alfa Romeo
Model
Brera and Spider Factory Service Manual
Year
2005–2010
Section
Exterior lighting › Reversing lights - description
Wiring diagrams and electrical functionsReversing lights - description

REVERSING LIGHTS - DESCRIPTION

DESCRIPTION

The vehicle is equipped with a white reversing light located in the passenger side rear light cluster.

It is activated each time reverse gear is engaged: this information arrives via the special switch located on the outside of the gearbox casing. The reversing lights circuit is supplied with the TEG inserted (INT) and protected by a special fuse in the junction unit under the dashboard.

The signal that reverse gear has been engaged is managed by the Body Computer which forwards this information to the steering column switch unit for the automatic operation of the rearscreen wiper and, via the CAN, to the other nodes, for example to the parking sensors control unit.

See E3021 REAR WINDOW WASH/WIPE

See E3032 DOOR MIRROR ADJUSTMENT

Parts & tools for this job For 2005 Alfa Romeo Brera

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.