FLAP ASSEMBLY - R R

Operation 7040A31 · PASSENGER COMPARTMENT TRIM

Removing

1. Open the dashboard compartment flap.

2. Release the ends of the end of travel rods.

3. Undo the bolts fixing the compartment.

1. Move the compartment slightly.

2. Release the courtesy light from its housing.

3. Disconnect the electrical connections (3a, 3b, 3c).

4. Recover the compartment.

4. If necessary, release the switch from its housing.

Refitting

Check that the compartment is not damaged.

If removed, refit the switch in its housing.

Connect the electrical connections.

Fit the courtesy light in its housing.

Position the compartment.

Tighten the compartment fixing bolts.

Engage the ends of the end of travel rods, then close the flap checking that it is working properly.