R.r. front wing mounting bracket
- Make
- Alfa Romeo
- Model
- GT Factory Service Manual
- Year
- 2003–2010
- Section
- Removing refitting › R.r. front wing mounting bracket
Body panels and frameR.r. front wing mounting bracket
R.R. FRONT WING MOUNTING BRACKET
Removing
- Check that the components connected are not distorted by checking the bodyshell alignment measurements using suitable equipment (gauges, templates or jigs).
- Carry out any bodyshell straightening operations before removing the component.
- Undo the fixing bolts shown in the diagram.
- Remove the side bracket from the vehicle.
Refitting
- Temporarily fasten the side bracket to the vehicle.
- Check the alignment and the uniformity of the gap between the bonnet lid (2a) and the front wing (2b).
- Remove the components fitted previously.
- Paint the front bracket (follow the recommended procedure).
- Proceed with the waxing stage.
Parts & tools for this job For 2003 Alfa Romeo GT
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Alfa Romeo touch up paint
- PARTPanel clip assortmentSearch: Alfa Romeo panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.