TAIL-GATE WIRING - R R

Operation 5505B55 · DOOR,BOOT AND BONNET WIRING.

Removing

Op. 7040H80 PARCEL RACK

Op. 7015A04 TAILGATE INTERIOR PANEL - R+R

Op. 5550D16 THIRD STOP LIGHT - R+R

Op. 7015A58 INTERNAL TAILGATE MOULDING (ONE) - R+R

Op. 7015B10 SINGLE TAILGATE LOCK - R+R OR REPAIR WITH PANEL/PROTECTION REMOVED

1. Remove the cover (1a) and the bolt (1b) underneath.

2. Release the inner retaining clips (2a) using a knife and extract the rear pillar trim (2b) leaving it fitted on the rear seat belt.

Work carefully if there is a Head Bag fitted.

Op. 5505B54 TAIL-GATE WIRING - R R

Refitting

Op. 5505B54 TAIL-GATE WIRING - R R

Fit the rear pillar moulding using the inner retaining clips.

Tighten the bolt fixing the rear pillar trim and reposition the protective cover.

Work carefully if there is a Head Bag fitted

Op. 7015B10 SINGLE TAILGATE LOCK - R+R OR REPAIR WITH PANEL/PROTECTION REMOVED

Op. 7015A58 INTERNAL TAILGATE MOULDING (ONE) - R+R

Op. 5550D16 THIRD STOP LIGHT - R+R

Op. 7015A04 TAILGATE INTERIOR PANEL - R+R

Op. 7040H80 PARCEL RACK