Low fuel pressure supply circuit check
- Make
- Alfa Romeo
- Model
- GT Factory Service Manual
- Year
- 2003–2010
- Section
- Diesel injection system › Low fuel pressure supply circuit check
‹ Prev Low return fuel pressure circuit checkNext › Injector high pressure, fuel circuit leakage test
EngineLow fuel pressure supply circuit check
LOW FUEL PRESSURE SUPPLY CIRCUIT CHECK
Connect the pressure transducer for the Examiner diagnostic equipment between the diesel filter (1a) and the pressure pump (1b) (connect to the filter outlet).
Turn the ignition ON.
Check, within 30 seconds, that the pressure gauge''s reading is between 2 and 3 bar.
The fuel pump in the tank stops after 30 seconds.
Make sure that the taps and adjustment screws next to the pressure gauge are open (except those on pipes not connected to the system).
‹ Prev Low return fuel pressure circuit checkNext › Injector high pressure, fuel circuit leakage test
Parts & tools for this job For 2003 Alfa Romeo GT
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.