PRESSURE PUMP PULLEY - R R

Operation 1060E30 · DIESEL PRESSURE PUMP

1.9 JTD 16V

Removing

Position the vehicle on the ramp

Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

Proceed with removal

Op. 1008C10 POWER UNIT UPPER REACTION LINK R R

Proceed with removal

Proceed with removal

Op. 1060G80 DS ELECTRIC INJECTION CONTROL UNIT - R R

Proceed with removal

Proceed with removal

Op. 4450B04 RIGHT FRONT WHEEL R R

Proceed with removal

Proceed with removal

Op. 7055B54 UNDER-ENGINE GUARD - R R

Proceed with removal

Proceed with removal

Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R.

Proceed with removal

1. Stop the pressure pump pulley from rotating using two bolts.

Op. 1092G10 SINGLE ENGINE BELT R R

2. Undo the pressure pump pulley nut.

Undo the two bolts fitted previously to stop the rotation of the pressure pump pulley.

Op. 1092A10 CRANKSHAFT SERVICES PULLEY - R.R.

Op. 1092G20 ENGINE COMPONENT SINGLE BELT FIXED TENSIONER - ONE - R + R

Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R

Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT

1. Remove the pressure pump pulley (1a) using the tool (1b).

Refitting

1. Replace the pressure pump pulley in its housing.

2. Stop the pressure pump pulley from rotating using two bolts.

3. Tighten the pressure pump pulley nut to torque.

Undo the two bolts fitted previously to stop the rotation of the pressure pump pulley.

Proceed with refitting

Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT.

Proceed with refitting

Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R.

Proceed with refitting

Op. 1092G20 ENGINE COMPONENT SINGLE BELT FIXED TENSIONER - ONE - R + R.

Proceed with refitting

Op. 1092A10 CRANKSHAFT SERVICES PULLEY - R.R..

Proceed with refitting

Op. 1092G10 SINGLE ENGINE BELT R R.

Proceed with refitting

Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R..

Proceed with refitting

Op. 7055B54 UNDER-ENGINE GUARD - R R.

Proceed with refitting

Op. 4450B04 RIGHT FRONT WHEEL R R.

Proceed with refitting

Op. 1060G80 DS ELECTRIC INJECTION CONTROL UNIT - R R.

Proceed with refitting

Op. 1008C10 POWER UNIT UPPER REACTION LINK R R.

Connect the negative (-) battery terminal

Remove the car from the ramps.