TURBO CHARGER INTERCOOLER - R + R

Operation 1048B50 · PRESSURE AIR CIRCUIT

1.9 JTD 16V

Removing

Position the vehicle on the ramp

Proceed with removal

Op. 7055B54 UNDER-ENGINE GUARD - R R

Proceed with removal

Op. 7210E10 R.R. FRONT BUMPER

Proceed with removal

1. Loosen the band and disconnect the supply hose between the turbocharger and the heat exchanger, heat exchanger side.

Op. 1048B48 HEAT EXCHANGER DUCT - R R

2. Loosen the band and disconnect the air supply duct from heat exchanger to inlet manifold, heat exchanger side.

3. Undo the supercharging air/air heat exchanger fixing bolts.

4. Remove the supercharging air/air heat exchanger after having released the pins from the lower fastening bushes.

Refitting

Place the supercharging air/air heat exchanger in its housing fastening the pins to the lower bushes.

Tighten the bolts fixing the supercharging air/air heat exchanger.

Connect the air supply hose from heat exchanger to inlet manifold, heat exchanger side, and tighten the band.

Connect the supply hose between the turbocharger and the heat exchanger, heat exchanger side, and secure with a band.

Proceed with refitting

Op. 1048B48 HEAT EXCHANGER DUCT - R R.

Proceed with refitting

Op. 7210E10 R.R. FRONT BUMPER.

Proceed with refitting

Op. 7055B54 UNDER-ENGINE GUARD - R R.

Remove the car from the ramps.