ENGINE OIL COOLING RADIATOR - R + R

Operation 1084C34 · ENGINE OIL COOLING CIRCUIT

3.2 V6

Removing

Position the vehicle on the ramp

Proceed with removal

Op. 7055B54 UNDER-ENGINE GUARD - R R

Proceed with removal

Proceed with removal

Op. 7055B64 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R

Proceed with removal

Proceed with removal

Op. 7055B42 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R

1. Undo the bolts (1a) and disconnect the engine oil inlet and outlet pipes (1b), engine oil cooling radiator side.

2. Undo the nuts (2a) and remove the engine oil cooling radiator (2b).

Op. 7210E10 R.R. FRONT BUMPER

Op. 1084C40 CONVOGLIATORE ARIA PER RADIATORE RAFFREDDAMENTO OLIO MOTORE - S.R.

Collect the engine oil in a suitable container.

Refitting

Place the engine oil cooling radiator back in its housing and fix it using the nuts.

Connect the engine oil inlet and outlet pipes, engine oil cooling radiator side and tighten the bolts.

Proceed with refitting

Op. 1084C40 CONVOGLIATORE ARIA PER RADIATORE RAFFREDDAMENTO OLIO MOTORE - S.R..

Proceed with refitting

Op. 7210E10 R.R. FRONT BUMPER.

Proceed with refitting

Op. 7055B42 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R.

Proceed with refitting

Op. 7055B64 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R.

Proceed with refitting

Op. 7055B54 UNDER-ENGINE GUARD - R R.

Refill the engine oil lubrication system

Op. 0010T11 ENGINE OIL CHECK LEVEL AND TOP UP.

Remove the car from the ramps.

1.9 JTD 16V

Removing

Position the vehicle on the ramp

Proceed with removal

Op. 7055B54 UNDER-ENGINE GUARD - R R

Proceed with removal

Proceed with removal

Op. 7210E10 R.R. FRONT BUMPER

1. Undo the bolt (1a) and disconnect the cooling radiator engine oil supply pipe (1b), radiator side.

2. Undo the bolt (2a) and disconnect the cooling radiator engine oil return pipe (2b), radiator side.

Op. 1084C40 CONVOGLIATORE ARIA PER RADIATORE RAFFREDDAMENTO OLIO MOTORE - S.R.

3. Undo the nuts (3a) and remove the engine cooling radiator (3b).

Recover the engine oil which comes out in a suitable container.

Refitting

Place the engine oil cooling radiator back in its housing and fix it using the nuts.

Connect the engine oil return pipe from the cooling radiator, radiator side, and tighten the bolt.

Connect the engine oil supply pipe to the cooling radiator, radiator side, and tighten the bolt

Proceed with refitting

Op. 1084C40 CONVOGLIATORE ARIA PER RADIATORE RAFFREDDAMENTO OLIO MOTORE - S.R..

Proceed with refitting

Op. 7210E10 R.R. FRONT BUMPER.

Proceed with refitting

Op. 7055B54 UNDER-ENGINE GUARD - R R.

Refill the engine oil lubrication system

Op. 0010T11 ENGINE OIL CHECK LEVEL AND TOP UP.

Remove the car from the ramps.