Hydraulic tappet (one) - replaced with camshaft removed
- Make
- Alfa Romeo
- Model
- GT Factory Service Manual
- Year
- 2003–2010
- Section
- Timing system › Hydraulic tappet (one) - replaced with camshaft removed
‹ Prev Front oil seal of r/h overhead camshafts - replaceNext › Camshafts in cylinder head extension - r r - includes cylinder head extension replacement if necessary
EngineHydraulic tappet (one) - replaced with camshaft removed
HYDRAULIC TAPPET (ONE) - REPLACED WITH CAMSHAFT REMOVED
Removing
1. Remove the relevant hydraulic tappet using an appropriate magnetic tool
Refitting
Lubricate with engine oil, then place the hydraulic tappet back in its housing.
Removing
1. Withdraw and remove the hydraulic tappet to be replaced from its housing.
Refitting
Lubricate with engine oil, then place the new hydraulic tappet back in its housing.
Removing
Remove the relevant hydraulic tappet using an appropriate magnetic tool
Refitting
Lubricate with engine oil, then place the hydraulic tappet back in its housing.
‹ Prev Front oil seal of r/h overhead camshafts - replaceNext › Camshafts in cylinder head extension - r r - includes cylinder head extension replacement if necessary
Parts & tools for this job For 2003 Alfa Romeo GT
- PARTEngine gasket setSearch: Alfa Romeo GT 2003 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.