Climate control recirculation not working
- Make
- Alfa Romeo
- Model
- GT Factory Service Manual
- Year
- 2003–2010
- Section
- Climate control › Climate control recirculation not working
Fault diagnosisClimate control recirculation not working
CLIMATE CONTROL RECIRCULATION NOT WORKING
Climate control system recirculation does not work in every state (normal/automatic)
| Results of the tests | ||||
| 1 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|---|---|---|---|
Connect the diagnostic equipment (Examiner Plus or Smart) to the diagnostic socket. Check that there are no faults in the climate control control unit. | Continue to Step 2 | An error is detected in the control unit | Continue following the instructions for the diagnostic equipment | |
| Communication lost with control unit - CAN error | Restore connection between climate control system control unit and body computer See | |||
| 2 | ACTIVE DIAGNOSIS WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
| Using the diagnostic equipment (Examiner or other instruments) carry out active diagnosis on the recirculation motor | Continue to Step 3 | Recirculation motor faulty connection | Restore the correct connection See | |
| Recirculation motor faulty | Replace the recirculation motor Op. | |||
| Recirculation motor flap faulty | Replace the recirculation motor flap Op. | |||
| 3 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | |||
Parts & tools for this job For 2003 Alfa Romeo GT
- TOOLA/C manifold gauge setSearch: AC manifold gauge set
- TOOLUV leak detection kitSearch: AC UV leak detection kit
- PARTCabin filterSearch: Alfa Romeo GT 2003 cabin filter
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.