Cd changer not working
- Make
- Alfa Romeo
- Model
- GT Factory Service Manual
- Year
- 2003–2010
- Section
- Radio and accessories etc.. › Cd changer not working
Fault diagnosisCd changer not working
CD CHANGER NOT WORKING
The CD-Changer is supplied and operated directly by the radio module.
| Results of the tests | ||||
| 0 | PRELIMINARY CHECK | All OK | Problems met | Operation |
|---|---|---|---|---|
| Check that the fault does not stem from incorrect use. | Continue to Step 1 | CD not correctly positioned | Restore the correct position. | |
| Faulty CD holder | Restore the operation of the holder | |||
2.0 JTS 3.2 V6 1.9 JTD 16V Radio controls on steering wheel | Check that the fault does not stem from incorrect use. Check that the steering wheel control buttons are working | Continue to Step 1 | CD not correctly positioned | Restore the correct position. |
| Faulty CD holder | Restore the operation of the CD holder. | |||
| Controls on the steering wheel faulty | Continue according to the instructions in See table | |||
| 1 | ELECTRICAL EQUIPMENT CHECK | All OK | Problems met | Operation |
| With the CD-Changer and radio removed from their housing, carry out the | Continue to Step 2 | Radio faulty. | Replace the radio Op. | |
| Wiring between CD Changer and radio faulty. | Renew the electrical connections See | |||
| CD Changer faulty. | Replace the CD-Changer Op. | |||
| 2 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | Fault persists | Replace the radio Op. | |
Parts & tools for this job For 2003 Alfa Romeo GT
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Alfa Romeo GT
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.