22 · Diagnostics

Connect not working

Fault diagnosisConnect not working

CONNECT NOT WORKING

All the systems are not working: CD radio, GSM telephone, pictogram or map navigator, voice command module

0	PRELIMINARY CHECK	All OK	Problems met	Operation
		Results of the tests
	Check whether the Connect works when the on switch is operated or the key is turned to the ON position	Continue to Step 5	It does not work when the key is turned to the ON position and/or the on button is operated	Continue to Step 1
1	CHECK ON FUSE	All OK	Problems met	Operation
	Check the condition of the supply fuse, controlled by the ignition and/or the direct supply fuse See See E4091 CONNECT	Continue to Step 2	Fuse broken	Repair short circuits and then replace the fuse See See E4091 CONNECT
2	ELECTRICAL EQUIPMENT CHECK	All OK	Problems met	Operation
	Check the continuity of the wiring between the battery and the fuse See See E4091 CONNECT	Continue to Step 3	Wiring broken	Renew the wiring See See E4091 CONNECT
3	ELECTRICAL EQUIPMENT CHECK	All OK	Problems met	Operation
	Check the continuity of the wiring between the battery and the connectors fitted on the Connect See See E4091 CONNECT	Continue to Step 4	Wiring broken	Renew the wiring See See E4091 CONNECT
4	CHECKING ELECTRICAL EQUIPMENT	All OK	Problems met	Operation
	Check the condition of the Connect supply fuse See See E4091 CONNECT	Continue to Step 5	Fuse broken	Repair short circuits and then replace the fuse See See E4091 CONNECT
5	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the Info Telematic Node is working properly.	End of diagnosis	Fault persists	Replace the Connect module Op. Op. 5580P12 CONNECT PANEL REPLACE

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.