Passenger compartment wind noise, lower area / (underbody)
- Make
- Alfa Romeo
- Model
- GT Factory Service Manual
- Year
- 2003–2010
- Section
- Wind noise › Passenger compartment wind noise, lower area / (underbody)
PASSENGER COMPARTMENT WIND NOISE, LOWER AREA / (UNDERBODY)
With the vehicle moving, there is a noise coming from the lower part of the passenger compartment
| Results of the tests | ||||
| 0 | PRELIMINARY CHECKS | All OK | Problems met | Operation |
|---|---|---|---|---|
1.9 JTD 16V 2.0 JTS | Check that the noise is actually coming from the underbody by carrying out the preliminary check for locating noises | Continue to Step 1 | The wind noise comes from the front dooor | Continue according to the instructions in See table |
| The wind noise is coming from the area of the bonnet | Continue according to the instructions in See table | |||
| The noise is coming from the windscreen area | Continue according to the instructions in See table | |||
| The noise is coming from the rear area | Continue according to the instructions in See table | |||
| 3.2 V6 | Check that the noise is actually coming from the underbody by carrying out the preliminary check for locating noises | Continue to Step 2 | The wind noise comes from the front dooor | Continue according to the instructions in See table |
| The wind noise is coming from the area of the bonnet | Continue according to the instructions in See table | |||
| The noise is coming from the windscreen area | Continue according to the instructions in See table | |||
| The noise is coming from the rear area | Continue according to the instructions in See table | |||
| 1 | UNDER ENGINE PARTITION CHECK | All OK | Problems met | Operation |
1.9 JTD 16V 2.0 JTS | Check the condition of the bulkhead under the engine and make sure that it is correctly fitted | Continue to Step 2 | Bulkhead damaged or not fixed correctly | Renew or replace the bulkhead Op. |
| 2 | UNDERFLOOR CHECK | All OK | Problems met | Operation |
Check the underfloor cover. In particular, ascertain:
| Continue to Step 3 | Faults in the underfloor cover | Renew the plugs and seals for the underfloor cover | |
| 3 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | |||
Parts & tools for this job For 2003 Alfa Romeo GT
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Alfa Romeo GT
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.