Clutch push rod adjustment check
- Make
- Alfa Romeo
- Model
- GT Factory Service Manual
- Year
- 2003–2010
- Section
- Hydraulic transmission external linkage › Clutch push rod adjustment check
‹ Prev Gear lever checkNext › Check on correct engagement of all gears using the gear lever with the engine not running
Gearbox and differentialClutch push rod adjustment check
CLUTCH PUSH ROD ADJUSTMENT CHECK
Turn the ignition key to the ON position.
Connect the Examiner Plus or Smart diagnostic equipment.
Check that the clutch position is between 28 and 28.5 mm.
To adjust the clutch correctly, the locknut must be loosened and then the push rod adjusted until the reading on the Examiner Plus or Smart indicates a clutch position between 28 and 28.5 mm.
The locknut should be tightened to a torque of 0.6 ± 0.05 daNm.
‹ Prev Gear lever checkNext › Check on correct engagement of all gears using the gear lever with the engine not running
Parts & tools for this job For 2003 Alfa Romeo GT
- PARTClutch kitSearch: Alfa Romeo GT 2003 clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Alfa Romeo GT manual gearbox oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.