Group 27 - Axle shafts
- Make
- Alfa Romeo
- Model
- GTV / Spider GTV and Spider (916) Factory Service Manual
- Year
- 1995–2000
- Section
- Tightening torques › Group 27 - Axle shafts
00 Technical data and maintenanceGroup 27 - Axle shafts
(CONTINUED)
| Part | Nm | kgm |
|---|---|---|
| Nut for fastening gear selection cable to gearshift rod | 13 ÷ 16 | 1.3 ÷ 1.6 |
| Screws fastening lower cover to gearbox | 24 ÷ 31 | 2.4 ÷ 3.1 |
| Threaded taper cap for draining gearbox oil | 19 ÷ 30 | 1.9 ÷ 3.1 |
| Threaded cap for draining differential oil | 19 ÷ 30 | 1.9 ÷ 3.1 |
| Screw fastening differential cover to gearbox | 24 ÷ 31 | 2.4 ÷ 3.2 |
| Screw retaining gearshift control rod spring | 19 ÷ 30 | 1.9 ÷ 3.1 |
| Ringnut locking transmission shaft gears | 143 ÷ 185 | 14.6 ÷ 18.9 |
| Ringnut locking secondary shaft gears | 143 ÷ 185 | 14.6 ÷ 18.9 |
| Screw fastening main rear bearing retainer plate | 24 ÷ 31 | 2.5 ÷ 3.2 |
| Screw fastening secondary rear bearing retainer plate | 24 ÷ 31 | 2.5 ÷ 3.2 |
| Self-locking screw fastening 1st & second gear fork | 24 ÷ 31 | 2.5 ÷ 3.2 |
| Self-locking screw fastening 3rd and 4th gear nib | 24 ÷ 31 | 2.5 ÷ 3.2 |
| Self-locking screw fastening 3rd and 4th gear fork | 24 ÷ 31 | 2.5 ÷ 3.2 |
| Self-locking screw fastening 5th gear and reverse gear nib | 24 ÷ 31 | 2.5 ÷ 3.2 |
| Screw fastening reversing lever complete | 24 ÷ 31 | 2.5 ÷ 3.2 |
| Self-locking screw fastening 5th gear fork | 24 ÷ 31 | 2.5 ÷ 3.2 |
| Screw fastening gearbox control shaft bush on box | 7 ÷ 9 | 0.7 ÷ 0.9 |
| Self-locking nut fastening gearshift control lever on inner shaft | 24 ÷ 31 | 2.5 ÷ 3.2 |
| Screw fastening gearshift control lever on outer shaft | 24 ÷ 31 | 2.5 ÷ 3.2 |
| Screw fastening mileage recorder support | 8 ÷ 12 | 0.8 ÷ 1.2 |
| Self-locking screw for fastening crown wheel | 81 ÷ 90 | 8.3 ÷ 9.2 |
Group 27 - Axle shafts
| Part | Nm | kgm |
|---|---|---|
| Screws fastening differential side axle shaft joint to flange | 40 ÷ 52 | 4.1 ÷ 5.3 |
| Screws fastening intermediate axle shaft flange | 8 ÷ 10 | 0.8 ÷ 1.0 |
| Nut fastening axle shafts to wheel hub (*) | 67 ÷ 74 + 62° ± 2° | 6.8 ÷ 7.5 + 62° ± 2° |
(*) See GROUP 44 - Suspensions and Wheels
Group 33 - Brakes
| Part | Nm | kgm |
|---|---|---|
| Stiff brake pipe unions on brake pump | 13 ÷ 15 | 1.3 ÷ 1.5 |
| Stiff brake pipe unions on A.B.S. hydraulic unit | 13 ÷ 15 | 1.3 ÷ 1.5 |
| Nut fastening brake pedal | 27 ÷ 34 | 2.8 ÷ 3.5 |
| Nuts fastening servobrake to pedal unit | 10 ÷ 16 | 1 ÷ 1.6 |
| Screws fastening front brake calipers (*) | M10 x 1.25 53 ÷ 59 | 5.4 ÷ 6.0 |
| M12 x 1.25 98 ÷ 108 | 10 ÷ 11 |
(*) : Change the screws each time they are tightened
(CONTINUED)
Parts & tools for this job For 1995 Alfa Romeo GTV / Spider
- PARTWheel bearingSearch: Alfa Romeo GTV / Spider 1995 wheel bearing
- TOOLBearing puller kitSearch: wheel bearing puller kit
- PARTCV boot kitSearch: Alfa Romeo GTV / Spider 1995 cv boot kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.