Workshop Manuals Factory service & repair Aston Martin
01 Introduction and safety02 Electrics03 Body and trim04 Air conditioning05 Diagnostic system (PDU)
Aston Martin DB7 Factory Workshop Manual Volume 2: Electrics, Body and Air Conditioning (1994-1998)04 · Air conditioning
04 · Heating & A/C

Climate Control System

Make
Aston Martin
Model
DB7 Factory Workshop Manual Volume 2: Electrics, Body and Air Conditioning
Year
1994–1998
Section
General description › Climate Control System
Air conditioningClimate Control System

Climate Control System

Features

  • Refrigerant R134A (Hydro fluorocarbon), non ozone depletery.
  • PAG (polyalkylene glycol) synthetic compressor lubricating oil.
  • Dedicated and improved compressor for Refrigerant R134A.
  • Quick fit and release self sealing charge and discharge ports.
  • Triple pressure (Trinary) switch to control the compressor (incorporated into the liquid line).
  • Clamp retained 'O' ring seals at the expansion valve and evaporator.
  • All aluminium evaporator matrix and pipe work.
  • Aluminium receiver-dryer (without sight glass) and HFC dedicated desiccant.
  • Parallel flow extended height condenser.
  • Single muffler situated in the suction hose.
  • Improved electrical system connectors.
  • Improved system control panel.
  • System Recognition

Identification Features

  • Aluminium pipes.
  • Large diameter, quick release charge and recovery ports.
  • No sight glass.

Parts & tools for this job For 1994 Aston Martin DB7

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.