Maintenance

Maintenance

Right Side Front Crush Bar for the Body Reinforcement - Remove and Install

Removal

1. Remove the two nuts that attach the washer bottle neck and bracket to the crush bar.
2. Release the washer bottle neck and bracket from the crush bar.
3. Remove the four Torx screws and two nuts that attach the crush bar to the body.
4. Remove the crush bar.

Install

1. Put the crush bar into position.
2. Install and torque tighten the four Torx screws and two nuts that attach the crush bar to the body.
3. Install the washer bottle neck and bracket to the crush bar.
4. Install and tighten the two nuts that attach the washer bottle neck and bracket to the crush bar.

Left Side Front Crush Bar for the Body Reinforcement - Remove and Install

Removal

1. Remove the four Torx screws and two nuts that attach the crush bar to the body.
2. Remove the crush bar.

Install

1. Put the crush bar into position.
2. Install and torque tighten the four Torx screws and two nuts that attach the crush bar to the body.

Front Crush Brace - Remove and Install

Removal

1. Remove the four Torx screws that attach the crush brace to the left side and right side crush brace brackets.
2. Remove the crush brace.

Install

1. Put the crush brace in position.
2. Install and torque tighten the four Torx screws that attach the crush brace to the left side and right side crush brace brackets.