Workshop Manuals Factory service & repair Aston Martin
Aston Martin V8 Vantage Factory Workshop Manual (2005-2010)08 · 07 Transmission
08 · Transmission

Maintenance

Make
Aston Martin
Model
V8 Vantage Factory Workshop Manual
Year
2005–2010
Section
Automatic Shifting Subsystem › Maintenance
07 TransmissionMaintenance

Maintenance

Transmission Control Module-Renew-Sportshift Only

Repair Operation Time (ROT)
ItemCode
Transmission Control Module-Renew07.11.AA

Removal

  1. Open boot lid.
  2. Disconnect vehicle battery.

WARNING
ALWAYS DISCONNECT THE BATTERY EARTH (- VE) TERMINAL FIRST.

  1. Remove access panel (right-hand side).
  2. Release strap securing puncture repair kit from bracket and remove.
  3. Remove retention clip (bolt x1) and Transmission Control Module from mounting bracket.
  4. Release Transmission Control Module multiplug catches (x2), disconnect Transmission Control Module multiplugs (x2) and remove.

Installation

  1. Install Transmission Control Module and connect multiplugs.
  2. Install Transmission Control Module to mounting bracket, secure with retention clip and bolt.
  3. Install puncture repair kit to bracket and secure with strap.
  4. Install access panel (right-hand side).
  5. Connect vehicle battery.

WARNING
ALWAYS CONNECT THE BATTERY EARTH (+VE) TERMINAL FIRST.

  1. Close the boot lid.

Parts & tools for this job For 2005 Aston Martin V8 Vantage

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.