audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Handling and transporting steering column > < Steering column
Steering column - exploded view
Steering column - exploded view
  Note
t  Load-bearing components or parts of the suspension must not be welded or straightened.
t  Always renew self-locking nuts.
t  Always renew corroded nuts/bolts.
   
1 - Central tube for dash panel
2 - Crash bar
q   Different versions available; for correct version, refer to → Electronic parts catalogue „ETKA“
3 - Bolt
q   20 Nm
4 - Shear bolt
q   Tighten shear bolt until head shears off
5 - Steering lock housing with lock cylinder and ignition/starter switch
q   Removing and installing → Rep. gr.94
6 - Electronic steering column lock control unit -J764-
q   Removing and installing → Chapter
q   Installed on vehicles with „keyless entry system“
7 - Bolt
q   20 Nm
q   Observe correct tightening sequence → Anchor
8 - Bolt
q   8 Nm
q   Observe correct tightening sequence → Anchor
9 - Bolt
q   30 Nm
q   Always renew if removed
10 - Steering column
q   Removing and installing → Chapter
q   Observe instructions for handling and transporting steering column → Chapter

   

Handling and transporting steering column > < Steering column