A3 L4-2.0L Turbo (BPY) (2006)
![background image](/audi/a3/l4-2.0l_turbo_(bpy)/Page-4473005.png)
-
Very lightly coat seal - arrow - in cover using grease G 052 168 A1.
-
Install cover with new seal.
Rest of installation is performed in reverse order of removal.
-
Install steering gear.
After installing, basic setting for Steering Angle Sensor G85 must be performed using Vehicle Diagnostic, Testing and Information System VAS
5051B.
-
Perform adaptation and basic setting for Steering Torque Sensor G269 using Vehicle Diagnostic, Testing and Information System VAS 5051B.
-
Perform vehicle alignment.