audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Removing and installing selector lever display illumination bulbL101 with selector lever position displayY26 > < Detaching and attaching selector lever boot on selector lever handle
Moving interlock button on selector lever handle into installation position
Moving interlock button on selector lever handle into installation position
Special tools and workshop equipment required
   
t  Release tool -T40203-
  W00-10744
Procedure
l  Installation position: the interlock button -1- must protrude from the selector lever handle.
  Note
If the interlock button has been pressed in, it must be moved back into its installation position so that the selector lever handle can be installed.
  A34-10584
–  Carefully insert release tool -T40203- into selector lever handle -1- as far as stop.
  Note
For illustration purposes, the handle is shown without selector lever boot.
l  Recess on release tool -T40203- should face interlock button, hook should point towards left.
  A34-10697
–  Hold selector lever handle -A- and turn release tool -T40203- 180° in direction of -arrow 1-.
–  Hold handle and carefully pull out release tool -T40203--arrow 2-.
  A34-10698
l  When pulling out release tool -T40203-, interlock button -A- on selector lever handle is pressed out and locked in position.
l  Do not touch interlock button on selector lever handle before installing handle so that interlock button is not pressed in again.
  A00-10439

Removing and installing selector lever display illumination bulbL101 with selector lever position displayY26 > < Detaching and attaching selector lever boot on selector lever handle