audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Exploded view - selector mechanism > < Moving interlock button on selector lever handle into installation position

A3 Mk2

Removing and installing selector lever display illumination bulbL101 with selector lever position displayY26
Removing and installing selector lever display illumination bulb -L101- with selector lever position display -Y26-
Removing
  Note
The selector lever display illumination bulb -L101- with selector lever position display -Y26- can only be renewed together with the trim frame as one unit.
–  Apply handbrake.
–  Shift selector lever into position „N“.
–  Switch off ignition.
   
–  Unclip selector lever boot on both sides and lift it off -arrows-.
–  Pull selector lever boot up and over handle.
  A34-10635
–  Carefully unclip trim frame -1- at fasteners and lift out -arrows-.
–  Unplug electrical connector.
Installing
Perform installation in reverse sequence of removal.
  A96-10095

Exploded view - selector mechanism > < Moving interlock button on selector lever handle into installation position