audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing Haldex coupling pumpV181, final drive "02D/0AV" > < Exploded view - dismantling and assembling Haldex coupling (generation "Haldex II"), rear final drive "02D/0AV&qu

A3 Mk2

Removing and installing oil filter for Haldex coupling, final drive „02D/0AV“
Removing and installing oil filter for Haldex coupling, final drive „02D/0AV“
Special tools and workshop equipment required
   
t  Torque wrench -V.A.G 1331-
  W00-0427
t  Drip tray for workshop hoist -VAS 6208-
  W00-10228
Removing
–  Position drip tray -VAS 6208- under final drive.
–  Unscrew sealing cap -arrow-.
  A39-10225
–  Pull out oil filter element.
Installing
Installation is carried out in the reverse order; note the following:
–  Fit O-ring -2- on oil filter bracket -1-.
–  Fit spring -4- in oil filter -3-.
  A39-10226
–  Fit sealing cap -arrow- with new O-ring and tighten. Tightening torque → Item
–  Check oil level in Haldex coupling → Chapter.
  A39-10225

Removing and installing Haldex coupling pumpV181, final drive "02D/0AV" > < Exploded view - dismantling and assembling Haldex coupling (generation "Haldex II"), rear final drive "02D/0AV&qu