A3 Quattro V6-3.2L (BUB) (2008)
Lower steering column trim:
-
Remove bolts - 4 - and remove steering column adjustment handle - 3 -.
-
Remove bolts - 1 -, - 2 - and - 5 -.
-
Remove lower part of steering column trim.
Installing
Installation is reverse of removal, but note the following:
-
First install lower part of trim and then handle.
-
Then hook front of upper part of steering column trim into lower part - arrow 1 -.
-
Ensure pin on rear of steering column lower trim engages in opening on steering column upper trim retaining tab - arrow 2 -.
NOTE: Shown on removed steering column trim in illustration.
-
Engage gap cover on instrument cluster.
Tightening torques
Component.........................................................................................................................................................................................................................Nm
Lower steering column trim to steering column switch module...........................................................................................................................................3.5
Handle to steering column adjustment clamping lever.........................................................................................................................................................3.5