–
| Remove seat pan cover and padding → Chapter. |
–
| Cut out area -A- from old heating element together with electrical connection wire. |
–
| Remove old connection wire. |
–
| Cut electrical connection wires leading to heating elements at seat bolsters at positions -B-. |
–
| Align new heating elements on seat surface, pull off protective cover and bond new heating elements firmly onto padded surfaces (in same position as old heating elements). |
–
| Route connection wires to seat bolsters through slots in seat padding (avoid crossing wires). |
–
| Guide connection wires downwards through opening provided in seat padding. |
|
|
|