|
Servicing clutch mechanism
Servicing clutch mechanism
Notes:
-
◆ Observe or obtain radio code on vehicles with coded radio.
-
◆ Disconnect battery earth strap with the ignition switched off.
-
◆ Lubricate all bearings and contact surfaces with polycarbamide grease G 052 142 A 2.
-
◆ Before working on pedal cluster, remove cover below dash panel:
=> General body repairs; Repair Group 68; Shelves/Trim panels; Removing storage compartment on driver's side
-
◆ Make sure that no brake fluid escapes into the plenum chamber or onto the gearbox below. If this does happen, clean the affected areas thoroughly.
-
◆ When performing work in the footwell, put cloths on the carpet to protect it from possible brake fluid spills.
|
