audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Exploded view - selector lever cable and locking cable > < Dismantling and assembling selector mechanism

A4 Mk2

Removing and installing selector lever lock solenoidN110
Removing and installing selector lever lock solenoid -N110-
   
Removing
–  Remove selector mechanism cover → Chapter.
–  Unplug electrical connector at selector lever lock solenoid -N110-.
–  Release retainer and pull out selector lever lock solenoid -N110- from the front -arrows-.
  A37-0466
Installing
Installation is carried out in reverse sequence; note the following:
–  Press selector lever lock solenoid into guide until it engages. Actuating lever -2- for solenoid must engage in locking lever -1- on selector mechanism.
–  Install selector mechanism cover → Chapter.
  A37-0467

Exploded view - selector lever cable and locking cable > < Dismantling and assembling selector mechanism