Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing secondary air pump motor V101 >
< Checking combination valve for secondary air system for proper operation and leakage
A4 Mk2
Power unit
4-Cylinder engine (2-valve), Mechanics
Exhaust system
Secondary air system
Removing and installing combination valve for secondary air system
Removing and installing combination valve for secondary air system
Removing and installing combination valve for secondary air system
Removing
–
Lift off engine cover
-arrows-
.
–
If fitted, detach cover
-1-
on right of engine compartment.
–
Detach vent hose
-2-
leading to exhaust gas recirculation valve -N18-.
–
Disconnect hose
-4-
for crankcase breather system at air pipe.
–
Remove air pipe
-1-
and
-3-
.
–
Unscrew bolts
-1-
.
–
Detach hose
-2-
from combination valve.
–
Detach combination valve.
Note
Shown from rear with engine removed for illustration purposes.
Installing
Installation is carried out in the reverse order; note the following:
Note
t
Renew seals and gaskets.
t
Secure all hose connections with the correct type of hose clips (same as original equipment)
→ Parts catalogue.
Tightening torque
Component
Nm
Combination valve to connecting flange
10
Power unit
4-Cylinder engine (2-valve), Mechanics
Exhaust system
Secondary air system
Removing and installing combination valve for secondary air system
Removing and installing secondary air pump motor V101 >
< Checking combination valve for secondary air system for proper operation and leakage