A4 Mk2
Exploded view for 6-cyl. petrol engine (MPI) |
1 - | Power steering box |
q | For correct version refer to → Parts catalogue |
2 - | Expansion hose |
3 - | Return hose |
4 - | Cap with dipstick |
q | Checking fluid level → Chapter |
5 - | Hexagon bolt, 9 Nm |
6 - | Reservoir |
q | Use hydraulic fluid → Parts catalogue when filling system |
7 - | Rubber mounting |
8 - | Hose clip |
q | Use -V.A.G 1275- to tighten |
q | Always renew |
9 - | Return hose |
q | Between reservoir and cooling pipe |
10 - | Hose clip |
q | Use -V.A.G 1275- to tighten |
q | Always renew |
11 - | Hexagon bolt, 10 Nm |
12 - | Cooling pipe |
13 - | Cable tie |
14 - | Hose clip |
q | Use -V.A.G 1275- to tighten |
q | Always renew |
15 - | Suction hose |
q | Installation position → Chapter |
16 - | Hose clip |
q | Use -V.A.G 1275- to tighten |
q | Always renew |
17 - | Suction hose |
q | Installation position → Chapter |
18 - | Hose clip |
q | Use -V.A.G 1275- to tighten |
q | Always renew |
19 - | Power steering pump |
q | For 6-cyl. petrol engines |
q | For correct version refer to → Parts catalogue |
q | Fill with fluid before installing ⇒ Note → Chapter |
20 - | Seal |
q | Always renew |
21 - | Expansion hose |
22 - | Seal |
q | Always renew |
23 - | Banjo bolt, 50 Nm |
24 - | Hexagon bolt, 8 Nm |
25 - | Expansion hose union, 40 Nm |