A4 Mk3
| Exploded view of outer three-point seat belt (rear) |
Note| Illustration shows three-point seat belt for a saloon. |
| 1 - | Bolts |
| q | When removing and installing belt guide, never change position of bolts (set by manufacturer) |
| 2 - | Outer belt guide (rear) |
| q | Renew entire belt guide if damaged |
| q | Removing and installing: saloon → Chapter; Avant → Chapter |
| 3 - | Bolt |
| q | Renew bolt if removed following an accident |
| q | 45 Nm |
| 4 - | Nut |
| 5 - | Automatic belt retractor |
| q | Depending on country-specific version: with or without rear belt tensioner igniter on driver side -N196- |
| q | Depending on country-specific version: with or without rear belt tensioner igniter on front passenger side -N197- |
| q | Removing and installing: saloon → Chapter; Avant → Chapter |
| 6 - | Noise insulation |
| q | For automatic belt retractor |
| 7 - | Electrical connector |
| q | Depending on country-specific version: for rear belt tensioner igniter on driver side -N196- |
| q | Depending on country-specific version: for rear belt tensioner igniter on front passenger side -N197- |
| 8 - | Bolt |
| q | Renew bolt if removed following an accident |
| q | 45 Nm |
| 9 - | Outer belt end fitting (rear) |
| q | Removing and installing → Chapter |