| Dismantling and assembling left mounting plate with control motors -V108- and -V110- |
| –
| Removing mounting plate with left footwell flap control motor -V108- and left centre vent control motor -V110- → Chapter |
Note | t
| The mounting plate with the left footwell flap control motor -V108- and the left centre vent control motor -V110- is only fitted on vehicles with an air conditioner of the „Deluxe“ type. |
| t
| At present all the control motors on this vehicle are identical. During basic setting, control motor assignment and adaption are implemented on the basis of the arrangement in the series connection of the wiring. If the sequence is not as specified, the matching of the control motors and thus flap control will not be correct → Chapter „Block diagram of air conditioner control motors“. |
| t
| The shaft of the control motors has no stop. The shaft of these control motors can thus be inserted in any position in the cam plates. |
| t
| On right-hand drive vehicles, the cam plate → Item is not driven directly by way of the control motor shaft. With such vehicles, the cam plate is actuated via two additional gear wheels → Chapter. |
|
|
|
