A4 Mk3
Exploded view - ATF cooler, ATF lines and exchangeable ATF filter - vehicles with 8-cyl. engine |
1 - | ATF cooler |
q | Integrated in radiator for engine coolant |
q | Removing and installing → Rep. gr.19 |
2 - | ATF/oil pipes |
q | Must be renewed if removed |
q | Lightly lubricate O-rings with ATF before inserting |
3 - | O-ring |
q | Renew |
q | Lightly lubricate with ATF before inserting |
4 - | ATF line (return) |
q | Removing and installing → Chapter |
q | Cleaning → Chapter |
5 - | O-rings |
q | Renew |
q | Lightly lubricate with ATF before inserting |
6 - | ATF line (supply) |
q | Removing and installing → Chapter „Removing and installing ATF lines - vehicles with 8-cyl. engine“ |
q | Cleaning → Chapter |
7 - | Bolt |
q | 20 Nm |
q | Secures ATF supply line and bracket for catalytic converter |
8 - | Bolt |
q | 20 Nm |
q | First push in ATF return line ( → Item) and then ATF supply line ( → Item) with new O-rings into filter housing by hand as far as stop |
9 - | O-ring |
q | Cannot be renewed at present. ATF line must be renewed if leakage occurs. |
10 - | Retaining clip |
q | Press onto connection and then pull to check that retaining clip has engaged properly |
11 - | Bolt |
q | 9 Nm |
12 - | ATF pipe/hose assembly (supply) |
q | First push in ATF pipe/hose assembly with new O-ring by hand as far as stop |
q | Cleaning → Chapter |
13 - | Bolt |
q | 10 Nm |
14 - | Nut |
q | 5 Nm |
15 - | Filter housing |
16 - | Exchangeable ATF filter |
q | Lightly lubricate O-ring on filter with ATF before fitting |
q | → Chapter „Removing and installing exchangeable ATF filter“ |
17 - | O-ring |
q | Renew |
q | Lightly lubricate with ATF before inserting |
18 - | Cap for ATF filter |
q | 8 Nm |
19 - | Bolts |
q | 5 Nm |
20 - | O-ring |
q | Renew |
q | Lightly lubricate with ATF before inserting |
21 - | ATF pipe/hose assembly (return) |
q | First push in ATF pipe/hose assembly with new O-ring by hand as far as stop |
q | Removing and installing → Chapter „Removing and installing ATF lines - vehicles with 8-cyl. engine“ |
q | Cleaning → Chapter |
22 - | O-ring |
q | Cannot be renewed at present. ATF line must be renewed if leakage occurs. |
23 - | Bolt |
q | 5 Nm |
24 - | O-ring |
q | Renew |
q | Lightly lubricate with ATF before inserting |
25 - | Retaining clip |
q | Press onto connection and then pull to check that retaining clip has engaged properly |
26 - | Nut |
q | 9 Nm |