audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing hydraulic control unit > < Removing and installing automatic gearbox control unitJ217

A4 Mk3

Cleaning selector shaft
Cleaning selector shaft
Procedure
l  End cover must be removed → Chapter.
l  Automatic gearbox control unit -J217- must be removed → Chapter.
  Note
t  → Chapter „Repair instructions“.
t  → Chapter „Rules for cleanliness when working on the gearbox“.
   
–  Clean selector shaft detents -arrows-. Use lint-free cloths. When doing so, take particular care to remove metal swarf or the like from the contact surfaces of the magnets.
  Note
Make sure that spring -1- and roller -4- are properly secured.
–  Check roller -4- and spring -1- for damage; renew if necessary.
  A38-10185

Removing and installing hydraulic control unit > < Removing and installing automatic gearbox control unitJ217