A4 Sedan V6-3.2L (BKH) (2007)
Installing
‹› Replace combustion chamber seal and O-ring.
‹› Replace spacer ring if damaged.
‹› Lightly coat fuel injector O-rings with clean engine oil.
‹› Reinsert injector lines at same cylinder.
-
Clean bore in cylinder head with (T10133/4).
-
Clip the radial adjustment - 1 - to the support ring - 2 -.
-
When reinstalling a fuel injector, use a clean cloth to clean combustion residue from the groove for combustion chamber seal and the shaft of the
fuel injector.
-
Place (T10133/5) with new combustion chamber seal - 1 - on fuel injector - 2 -.