A4 Sedan V6-3.2L (BKH) (2007)
![background image](/audi/a4_sedan/v6-3.2l_(bkh)/Page-1936003.png)
-
Press grooved ball bearing out of mounting bracket.
Installing grooved ball bearing
Sealing ring, installing
-
Press new grooved ball bearing into mounting bracket.
-
Coat outer edge and sealing lip of oil seal with axle oil.
^
Installation position: The open side of the sealing ring faces the transmission.
-
Drive in new sealing ring for right flange shaft uniformly using driver 2062 5.5 mm below surface of mounting bracket, do not cant when doing
so.