A4 Sedan V6-3.2L (BKH) (2007)
![background image](/audi/a4_sedan/v6-3.2l_(bkh)/Page-1936004.png)
Note:
^
If reinstalling an old flange shaft, the seal must be driven in approx. 6.5 mm so that the new seal does not sit on the running surface of the old
seal.
-
Press mounting bracket with grooved ball bearing onto flange shaft.
-
Insert securing ring -arrow A-.
-
Install right flange shaft.
-
Check gear oil level in front final drive.