audi Workshop Repair Guides

Audi A5 Service and Repair Manuals - Workshop Guides

ABOUT US
Removing and installing non-return valve > < Checking vacuum pump -V192-

Removing and installing brake servo pressure sensor

Removing and installing brake servo pressure sensorG294
Removing and installing brake servo pressure sensor -G294-
Removing
–  Remove plenum chamber cover → Rep. gr.50.
  Note
The brake servo pressure sensor -G294- is located in the plenum chamber next to the brake servo.
–  Unplug electrical connector -1-.
   
–  Pull out pressure sensor in -direction of arrow-.
  Note
The pressure sensor is secured with clips.
  A47-10009
–  Release clip with a pair of pliers -1-.
–  Carefully lever off brake servo pressure sensor -G294-.
Installing
Installation is carried out in the reverse sequence.
  A47-10021

Removing and installing non-return valve > < Checking vacuum pump -V192-