Q5 Quattro V6-3.2L (CALB) (2009)
-
Place the tools on the rear hydraulic bonded rubber bushing as shown in the illustration.
1. Nut (T10263/5)
2. Thrust piece (T40185/5). The opening faces the rubber bonded bushing.
3. Subframe
4. Support Ring (T40185/6). The conical side must face upward and the ribs must fit into the openings in the bushing.
5. Tube (T40033/3)
6. Support Ring (T10205/4)
7. Hydraulic Cylinder (VAS 6178)
8. Nut (T10263/5)
9. Spindle (T10263/4). The spindle pins face downward.