Q5 Quattro V6-3.2L (CALB) (2009)
CAUTION!
‹› Hold the Hydraulic Cylinder (VAS 6178) securing during the pressing procedure.
‹› The hydraulic bonded rubber bushing releases "abruptly". There is a risk of injury from the tools and the hydraulic bonded rubber
bushing falling down.
Installation position, rear hydraulic bonded rubber bushing
The anti-twist mechanism (aluminum) - 1 - is perpendicular to direction of travel. The - arrow - points in driving direction.
‹› Before installing the front hydraulic bonded rubber bushing, carefully pry the anti-twist mechanism - 1 - off the bushing with a screwdriver near
the retaining tab - arrows -. Do this in several steps alternating from side to side.
-
Place the tools on the rear hydraulic bonded rubber bushing as shown in the illustration.