Q5 Quattro V6-3.2L (CALB) (2009)
Seat Cushion: Service and Repair
Bench Seat Cushion and Upholstery Assembly Overview
Bench Seat Cushion and Upholstery Assembly Overview
‹› The assembly overview is based on the two thirds left rear seat and one third right rear seat.
1
Upholstery
‹› Cover with upholstery, Removing and Installing, refer to => [ Bench Seat ] See: Service and Repair/Removal and Replacement/Rear Seats
‹› Cover, Separating from Cushion and Connecting. Refer to => [ Seat Bench Cover, Removing from Cushion ] See: Service and
Repair/Overhaul/Seat Upholstery, Covers/Rear Seat Cushion and Upholstery
2
Wire
‹› In foam in upholstery
‹› For securing cover to upholstery
3
Cushion clamp
‹› For securing cover to upholstery
‹› Replace after each disassembly
‹› Install in same location as before removal
4
Contour strip