Q5 Quattro V6-3.2L (CALB) (2009)
/Page-3153002.png)
‹› Sewn into cover
‹› For securing cover to upholstery
5
Cover
‹› Cover with upholstery, Removing and Installing, refer to => [ Bench Seat ] See: Service and Repair/Removal and Replacement/Rear Seats
‹› Cover, Separating from Cushion and Connecting. Refer to => [ Seat Bench Cover, Removing from Cushion ] See: Service and
Repair/Overhaul/Seat Upholstery, Covers/Rear Seat Cushion and Upholstery
6
Molding
‹› Sewn into cover
‹› For securing cover to upholstery
7
Cushion clamp
‹› For securing cover to outer cushion
‹› Replace after each disassembly
‹› Install in same location as before removal
CAUTION!
Ends of wire clips must face in direction of upholstery after installing and must be bent correctly. Otherwise, there is a risk of injury.
8
Wire
‹› In foam in upholstery
‹› For securing cover to upholstery
