Q5 Quattro V6-3.2L (CALB) (2009)
-
Check the dust and pollen filter and the air guide in the air intake housing leading to the A/C - C - for dirt and clean if necessary.
-
Check the groove around the A/C - D - and the bevel around the air intake housing - E - for damage.
‹› If the groove or the bevel are damaged, fill the damaged spot with, for example, silicone sealant (D176 001 A3). When using the A/C, air could
leak from here and this could result in noises.
-
Before installing the air intake housing - C - check the seal on the air intake shaft - A - for damage (if the seal is damaged, replace it).
-
Check the position of the lock, only if the latch - B - is in the position shown, can the air intake housing - C - and the A/C - D - be joined together.
-
According to the markings, connect the terminals leading to the air flow door motor (V71) - E - and leading to the recirculation door motor (V113)
- F - with the control motors.