Q5 Quattro V6-3.2L (CALB) (2009)
Air Duct: Service and Repair
Air Intake Duct
Air Intake Duct
Removing
-
Switch off ignition.
-
Air intake housing, removing. Refer to => [ A/C Unit Air Intake Housing ] See: A/C Unit Air Intake Housing.
-
Loosen the catches - A - and remove the air intake duct - B - from the air intake housing - C -
Installing
Installation is carried out in the reverse order, when doing this note the following.
-
Insert the air intake duct - B - into the brackets - C - on the air intake housing - C - and join both parts together.
‹› If one of the retaining tabs - A - has broken off or if one of the welded points no longer holds, both housing parts can be bolted together with
screws - D -.
-
Install the removed parts in the opposite order.
-
Perform a basic setting and the output Diagnostic Test Mode (DTM) on the Air Conditioning (A/C) system. Refer to => Vehicle Diagnosis,
Testing and Information System VAS 5051 in "Guided Fault Finding" function.
-
Check Diagnostic Trouble Code (DTC) memory of A/C control head climatronic control module (J255) and erase any displayed malfunction if
necessary. Refer to => Vehicle Diagnosis, Testing and Information System VAS 5051 in "Guided Fault Finding" function.