Q5 Quattro V6-3.2L (CALB) (2009)
Headlamp Alignment Actuator: Service and Repair
Headlamp Adjuster Trim
Headlamp Adjuster Trim
Removing
-
Remove the driver side instrument panel cover => [ Driver Side Instrument Panel Cover ].
-
Remove the headlamp adjuster.
-
Unclip the trim - 2 - at the top and move it forward - arrow -.
-
Remove the trim from the cut-out in the instrument panel cover on the driver side.
Installing
Installation is reverse of removal, but note the following:
-
Insert the tab - 1 - into the cut-out in the instrument panel cover on the driver side and push on it until the locks into place.