Q5 Quattro V6-3.2L (CALB) (2009)
Fluid Filter - A/T: Removal and Replacement
Gears, Shafts
ATF Filter
Special tools, testers and auxiliary items required
‹› Oil Collecting and Extracting Device (V.A.G 1782 )
Removing
‹› General repair notes. Refer to => [ Repair Information ] See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and
Repair/Procedures/0B5A Transmission/Repair Information.
‹› Rules for cleanliness when working on the DSG transmission. Refer to => [ Clean Working Conditions ] See: Transmission and
Drivetrain/Automatic Transmission/Transaxle/Service Precautions/0B5A Transmission/Clean Working Conditions.
-
Remove ATF oil pan. Refer to => [ Automatic Transmission Fluid Oil Pan ] See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Fluid Pan/Service and Repair/0B5A Transmission.
-
Place Used Oil Collection and Extraction Device ( V.A.G 1782) under transmission.
-
Carefully pull the ATF filter to the rear and off the mechatronic - arrow -.
Installing
Install in reverse order, paying attention to the following:
-
Mount O-ring - 2 - on the rear support on the ATF filter - 1 -.